We provide a premium quality chrome plating. No job is too small.
Plating of Bumpers
We provide a complete bumper restoration service. We straighten, repair dents and cracks and fill holes. All bumpers are stripped down to the bare metal (sandblasted on the back), all repairs including straightening, realignment, dent and wave removal are then completed. The bumper is polished to a mirror finish and triple plated with copper, nickel, and chrome. We take pride in our bumpers and provide you with the very best restoration service to finsih your bumpers.
Aluminum blowers, intakes, rear ends.. if you prefer the polished look on your parts rather than chrome plating, we can custom polish your parts 100%. Also stainless steel. We offer straightening and repair, removal of dents and dings on trim and hubcaps. We also polish brass and copper parts.
Plating of Pot Metal, Die Cast and White Metal
Due to the natural deterioration of this type of material it requires a great deal of work and time to restore. We can repair cracks and dents but in cases of severely deteriorated parts, filling pits, repairing cracks and dents can be achieved by hand filling and polishing. We do not grind out pits. This is the most difficult metal to refinish and your parts are only handled by experienced personel. All pieces go through an acid copper plate and buffing process. This takes a great dael of time and is very labor intensive but results in the best finish possible. Sometimes parts may be too deteriorated to restore to perfect condition. You will be notified if this is the case. We reserve the right to refuse orders that we believe will not result in satisfactory finishes.
Plating of Steel
We plate all types of steel and the final finish on a steel part is related to the age, condition, and type of steel the part is made of. Old, rusted, pitted, and deteriorated steel can be restored if there is enough metal left to work with. Sometimes the actual condition of the part can’t be known until the part is stripped. We can repair holes, cracks, and dents in steel parts. Cast iron parts are porous and extremely rough and may not polich out and plate to a mirror finish. You will be notified if your steel part is in a condition that can’t result in a proper finish. New parte generally turn out the best.
We are proud to offer chrome plating services to the greater Portland Oregon area. We are located in Oregon City. Call us today to see how we can be of service to you on your next chrome plating or metal finishing project.
13929 Fir St. Unit F
Oregon City, OR 97045
Our mission is to provide a superior quality plating or restoration job for a fair and reasonable cost. We aspire to recognize and fulfill our customer’s desires.